Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6108N15AGR-G
Voir les détails DataSheets

XC6108N15AGR-G

Product Overview

Category

XC6108N15AGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.5V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV (typical)
  • Low Quiescent Current: 30μA (typical)
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

XC6108N15AGR-G is available in a small SOT-25 package.

Essence

The essence of XC6108N15AGR-G is its ability to provide stable and regulated output voltage for various electronic applications.

Packaging/Quantity

XC6108N15AGR-G is typically packaged in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-25

Detailed Pin Configuration

XC6108N15AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: XC6108N15AGR-G ensures a stable output voltage of 1.5V regardless of input voltage fluctuations.
  • Low Dropout Voltage: The regulator maintains a low dropout voltage of 200mV, minimizing power dissipation.
  • Low Quiescent Current: With a quiescent current of only 30μA, the regulator consumes minimal power during standby or idle mode.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection to prevent overheating and damage.
  • Short Circuit Protection: XC6108N15AGR-G is equipped with short circuit protection, safeguarding the circuit from excessive current.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows compatibility with various power sources.
  • Low dropout voltage minimizes power dissipation.
  • Low quiescent current reduces power consumption during idle periods.
  • Thermal shutdown protection prevents overheating and damage.
  • Short circuit protection ensures circuit safety.

Disadvantages

  • Limited output current capacity (up to 150mA).

Working Principles

XC6108N15AGR-G operates based on the principle of voltage regulation. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 1.5V. The regulator continuously monitors the input voltage and adjusts its internal components to compensate for any fluctuations, ensuring a consistent output voltage.

Detailed Application Field Plans

XC6108N15AGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N15AGR-G are: - LM1117-1.5 - MCP1700-1502E/TO - LP2985-1.5

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.

Word count: 405 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6108N15AGR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6108N15AGR-G in technical solutions:

  1. Q: What is XC6108N15AGR-G? A: XC6108N15AGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N15AGR-G? A: The operating voltage range of XC6108N15AGR-G is typically between 0.7V and 6.0V.

  3. Q: How does XC6108N15AGR-G work? A: XC6108N15AGR-G continuously monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold.

  4. Q: What is the typical reset voltage of XC6108N15AGR-G? A: The typical reset voltage of XC6108N15AGR-G is 1.5V.

  5. Q: Can XC6108N15AGR-G be used in battery-powered applications? A: Yes, XC6108N15AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Is XC6108N15AGR-G suitable for automotive applications? A: Yes, XC6108N15AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  7. Q: Does XC6108N15AGR-G have built-in hysteresis? A: Yes, XC6108N15AGR-G has built-in hysteresis of typically 50mV, which helps prevent oscillation near the threshold voltage.

  8. Q: Can XC6108N15AGR-G be used in high-temperature environments? A: Yes, XC6108N15AGR-G has an operating temperature range of -40°C to +125°C, making it suitable for high-temperature environments.

  9. Q: What is the output type of XC6108N15AGR-G? A: XC6108N15AGR-G has an open-drain output, which requires an external pull-up resistor.

  10. Q: Is XC6108N15AGR-G available in different package options? A: Yes, XC6108N15AGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.