Voir les spécifications pour les détails du produit.
XC6108C11AGR-G
Product Overview
Category
XC6108C11AGR-G belongs to the category of voltage regulators.
Use
It is commonly used as a voltage regulator in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 1.1V
- Maximum Output Current: 100mA
- Low Dropout Voltage: 150mV (typical)
- Low Quiescent Current: 30μA (typical)
- High Ripple Rejection Ratio: 70dB (typical)
- Thermal Shutdown Protection
- Short Circuit Protection
Package
XC6108C11AGR-G is available in a small SOT-23-5 package.
Essence
The essence of XC6108C11AGR-G is its ability to regulate voltage efficiently and reliably in electronic circuits.
Packaging/Quantity
XC6108C11AGR-G is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 1.1V
- Output Current: Up to 100mA
- Dropout Voltage: 150mV (typical)
- Quiescent Current: 30μA (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
XC6108C11AGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6108C11AGR-G provides a stable output voltage of 1.1V, regardless of input voltage fluctuations.
- Low dropout voltage: The regulator maintains a low dropout voltage of 150mV, ensuring efficient power conversion.
- Low quiescent current: With a quiescent current of only 30μA, the XC6108C11AGR-G minimizes power consumption in standby mode.
- Thermal and short circuit protection: The device includes built-in protection mechanisms to prevent damage from excessive heat or short circuits.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for versatile applications.
- Low dropout voltage ensures efficient power conversion.
- Low quiescent current minimizes power consumption.
- Thermal and short circuit protection enhance reliability.
Disadvantages
- Limited maximum output current of 100mA may not be suitable for high-power applications.
- SOT-23-5 package may require careful handling during assembly.
Working Principles
XC6108C11AGR-G operates based on the principle of voltage regulation using a feedback control loop. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 1.1V, regardless of input voltage variations.
Detailed Application Field Plans
XC6108C11AGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C11AGR-G are: - LM1117-1.1 - MCP1700-1102E/TO - TPS78233DDCR - LP2985-33DBVR
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.
Word count: 411 words
Énumérez 10 questions et réponses courantes liées à l'application de XC6108C11AGR-G dans les solutions techniques
Sure! Here are 10 common questions and answers related to the application of XC6108C11AGR-G in technical solutions:
Q: What is XC6108C11AGR-G? A: XC6108C11AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C11AGR-G? A: The operating voltage range of XC6108C11AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C11AGR-G help in technical solutions? A: XC6108C11AGR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctions during power fluctuations.
Q: Can XC6108C11AGR-G be used in battery-powered applications? A: Yes, XC6108C11AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108C11AGR-G? A: XC6108C11AGR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or other devices.
Q: What is the typical reset threshold voltage of XC6108C11AGR-G? A: The typical reset threshold voltage of XC6108C11AGR-G is 1.1V.
Q: Does XC6108C11AGR-G have built-in hysteresis? A: Yes, XC6108C11AGR-G has built-in hysteresis of typically 0.1V, which helps prevent oscillation and ensures stable operation.
Q: Can XC6108C11AGR-G be used in automotive applications? A: Yes, XC6108C11AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6108C11AGR-G? A: XC6108C11AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Q: Is XC6108C11AGR-G RoHS compliant? A: Yes, XC6108C11AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C11AGR-G.