Voir les spécifications pour les détails du produit.
DZ2S130M0L Product Overview
Introduction
The DZ2S130M0L belongs to the category of semiconductor devices and is commonly used as a voltage regulator in electronic circuits. This component possesses specific characteristics, packaging, and quantity that make it suitable for various applications.
Basic Information Overview
- Category: Semiconductor device
- Use: Voltage regulator in electronic circuits
- Characteristics: High precision, low dropout voltage, low quiescent current
- Package: SOT-23
- Essence: Regulates voltage to ensure stable operation of electronic devices
- Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage: 1.8V
- Maximum Output Current: 300mA
- Dropout Voltage: 190mV at 100mA
- Quiescent Current: 75µA
Detailed Pin Configuration
The DZ2S130M0L has three pins: 1. Pin 1 (GND): Connected to ground 2. Pin 2 (VOUT): Output voltage 3. Pin 3 (VIN): Input voltage
Functional Features
- Voltage Regulation: Maintains a constant output voltage despite fluctuations in input voltage or load variations.
- Low Dropout: Operates with minimal voltage drop between input and output.
- Low Quiescent Current: Consumes minimal current when in standby mode.
Advantages and Disadvantages
Advantages
- High precision regulation
- Low dropout voltage
- Low quiescent current
- Small form factor
Disadvantages
- Limited maximum output current
- Restricted input voltage range
Working Principles
The DZ2S130M0L utilizes a feedback control mechanism to compare the output voltage with a reference voltage and adjusts the pass transistor to maintain a stable output voltage.
Detailed Application Field Plans
The DZ2S130M0L is widely used in portable electronic devices, battery-powered systems, and low-power applications where maintaining a stable voltage supply is critical.
Detailed and Complete Alternative Models
- DZ2S180M0L: Higher output voltage variant
- DZ2S050M0L: Lower output voltage variant
- DZ2S300M0L: Higher output current variant
In conclusion, the DZ2S130M0L serves as a crucial component in various electronic circuits, providing precise voltage regulation and ensuring the stable operation of electronic devices.
[Word Count: 366]
Énumérez 10 questions et réponses courantes liées à l'application de DZ2S130M0L dans les solutions techniques
What is DZ2S130M0L?
- DZ2S130M0L is a specific model of diode used in technical solutions, known for its high efficiency and reliability.
What are the key features of DZ2S130M0L?
- The key features include low forward voltage, high surge capability, and fast switching speed, making it suitable for various technical applications.
In what technical solutions is DZ2S130M0L commonly used?
- DZ2S130M0L is commonly used in power supplies, voltage regulation circuits, and electronic equipment where efficient power management is crucial.
What are the operating conditions for DZ2S130M0L?
- The operating conditions typically include a maximum forward current, reverse voltage, and temperature range, which should be carefully adhered to for optimal performance.
How does DZ2S130M0L compare to other diode models?
- DZ2S130M0L stands out for its low forward voltage drop and high surge capability compared to many other diode models, making it a preferred choice in certain technical solutions.
What are the potential applications where DZ2S130M0L may not be suitable?
- DZ2S130M0L may not be suitable for applications requiring extremely high current or ultra-low forward voltage drop, as there are specialized diodes designed for such purposes.
Are there any recommended circuit configurations when using DZ2S130M0L?
- It is advisable to follow the manufacturer's recommended circuit configurations and layout guidelines to ensure proper functionality and reliability of DZ2S130M0L in technical solutions.
What are the typical failure modes of DZ2S130M0L?
- Common failure modes may include thermal overstress, reverse voltage breakdown, and excessive current, highlighting the importance of proper heat dissipation and voltage/current protection measures.
Can DZ2S130M0L be used in automotive applications?
- Yes, DZ2S130M0L can be used in automotive applications, provided it meets the necessary automotive-grade standards and specifications.
Where can I find detailed technical specifications and application notes for DZ2S130M0L?
- Detailed technical specifications and application notes for DZ2S130M0L can be found on the manufacturer's website or in the product datasheet, providing comprehensive guidance for its application in technical solutions.