Voir les spécifications pour les détails du produit.
1N1195 Diode
Product Overview
Category:
The 1N1195 diode belongs to the category of semiconductor devices.
Use:
It is commonly used as a rectifier in electronic circuits.
Characteristics:
- Forward Voltage Drop: 0.7V
- Maximum Reverse Voltage: 200V
- Maximum Forward Current: 1A
- Package Type: DO-41
- Operating Temperature Range: -65°C to 175°C
Packaging/Quantity:
The 1N1195 diode is typically packaged in reels, tubes, or bulk quantities, depending on the supplier.
Specifications
- Forward Voltage Drop: 0.7V
- Maximum Reverse Voltage: 200V
- Maximum Forward Current: 1A
- Package Type: DO-41
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The 1N1195 diode has two pins, with the anode connected to the positive side and the cathode connected to the negative side in a circuit.
Functional Features
- Acts as a one-way valve for electric current.
- Allows current to flow in only one direction.
Advantages
- Low forward voltage drop.
- High surge current capability.
Disadvantages
- Relatively limited maximum reverse voltage compared to other diodes.
- Moderate forward current rating.
Working Principles
The 1N1195 diode operates based on the principle of creating a potential barrier at the junction between its P-type and N-type semiconductor materials, allowing current to flow in only one direction.
Detailed Application Field Plans
The 1N1195 diode finds applications in various electronic circuits, including: - Power supplies - Rectifiers - Voltage clamping circuits - Overvoltage protection circuits
Detailed and Complete Alternative Models
Some alternative models to the 1N1195 diode include: - 1N4001 - 1N4148 - 1N5408 - 1N5819
In conclusion, the 1N1195 diode is a versatile semiconductor device widely used in electronic circuits for rectification and voltage regulation purposes. Its low forward voltage drop and high surge current capability make it suitable for various applications, although its relatively limited maximum reverse voltage and forward current rating should be considered when selecting it for specific designs. Additionally, there are several alternative diode models available that can be used based on specific application requirements.
Word Count: 330
Énumérez 10 questions et réponses courantes liées à l'application de 1N1195 dans les solutions techniques
What is 1N1195?
- 1N1195 is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).
What are the key specifications of 1N1195?
- The 1N1195 diode has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward rectified current of 1 ampere, and a forward voltage drop of around 1 volt at 1 ampere.
How is 1N1195 typically used in technical solutions?
- 1N1195 diodes are often used in power supply circuits, battery chargers, voltage regulators, and other applications where AC to DC conversion is required.
What are the important considerations when using 1N1195 in a circuit?
- It's crucial to consider the maximum voltage and current requirements of the circuit, as well as the thermal characteristics of the diode to ensure proper heat dissipation.
Can 1N1195 be used in high-frequency applications?
- No, 1N1195 is not suitable for high-frequency applications due to its relatively slow recovery time.
Are there any common failure modes associated with 1N1195?
- Overheating due to excessive current or voltage, as well as reverse voltage breakdown, are common failure modes for 1N1195 diodes.
What are some alternative diodes that can be used in place of 1N1195?
- Alternatives include 1N400x series diodes, which have similar voltage and current ratings, or Schottky diodes for lower forward voltage drop applications.
How should 1N1195 diodes be handled and stored?
- They should be stored in a cool, dry environment and protected from static discharge. Proper handling techniques should be followed to avoid damaging the diodes.
Can 1N1195 diodes be used in automotive applications?
- Yes, they can be used in certain automotive applications such as battery charging systems and voltage regulation circuits.
What are the typical packaging options for 1N1195 diodes?
- 1N1195 diodes are commonly available in axial-lead packages, making them suitable for through-hole PCB mounting and general-purpose applications.