Voir les spécifications pour les détails du produit.
TS87C58X2-VIA
Product Overview
- Category: Microcontroller
- Use: Embedded systems, control applications
- Characteristics: High-performance, low-power consumption, versatile
- Package: 40-pin DIP (Dual Inline Package)
- Essence: Advanced microcontroller with integrated peripherals
- Packaging/Quantity: Available in tubes of 25 units
Specifications
- Architecture: 8-bit
- Clock Speed: Up to 33 MHz
- Program Memory: 8 KB Flash
- Data Memory: 256 bytes RAM
- I/O Pins: 32
- Timers/Counters: 3
- Serial Communication: UART, SPI, I2C
- Analog-to-Digital Converter: 8 channels, 10-bit resolution
- Operating Voltage: 2.7V to 5.5V
- Operating Temperature: -40°C to +85°C
Detailed Pin Configuration
The TS87C58X2-VIA microcontroller has a total of 40 pins. The pin configuration is as follows:
- VCC - Power supply voltage
- P0.0 - General-purpose I/O pin
- P0.1 - General-purpose I/O pin
- P0.2 - General-purpose I/O pin
- P0.3 - General-purpose I/O pin
- P0.4 - General-purpose I/O pin
- P0.5 - General-purpose I/O pin
- P0.6 - General-purpose I/O pin
- P0.7 - General-purpose I/O pin
- RST - Reset input
- XTAL1 - Crystal oscillator input
- XTAL2 - Crystal oscillator output
- P1.0 - General-purpose I/O pin
- P1.1 - General-purpose I/O pin
- P1.2 - General-purpose I/O pin
- P1.3 - General-purpose I/O pin
- P1.4 - General-purpose I/O pin
- P1.5 - General-purpose I/O pin
- P1.6 - General-purpose I/O pin
- P1.7 - General-purpose I/O pin
- EA/VPP - External Access/Programming Enable
- ALE/PROG - Address Latch Enable/Program Pulse
- PSEN - Program Store Enable
- P2.0 - General-purpose I/O pin
- P2.1 - General-purpose I/O pin
- P2.2 - General-purpose I/O pin
- P2.3 - General-purpose I/O pin
- P2.4 - General-purpose I/O pin
- P2.5 - General-purpose I/O pin
- P2.6 - General-purpose I/O pin
- P2.7 - General-purpose I/O pin
- GND - Ground
Functional Features
- High-performance 8-bit microcontroller suitable for various applications
- Integrated peripherals such as UART, SPI, and I2C for communication
- On-chip analog-to-digital converter for precise measurements
- Low-power consumption for energy-efficient designs
- Versatile I/O pins for interfacing with external devices
- Three timers/counters for accurate timing operations
- Flash memory for program storage
- Wide operating voltage range for flexibility
Advantages and Disadvantages
Advantages: - High-performance capabilities - Integrated peripherals simplify system design - Low-power consumption extends battery life - Versatile I/O pins enable flexible interfacing - Wide operating voltage range accommodates various power sources
Disadvantages: - Limited program memory compared to some other microcontrollers - Limited data memory for storing variables and data structures - 8-bit architecture may not be suitable for certain complex applications
Working Principles
The TS87C58X2-VIA microcontroller operates based on an 8-bit architecture. It executes instructions stored in its program memory, which is typically loaded with user-developed firmware. The integrated peripherals, such as UART, SPI, and I2C, enable communication with external devices. The microcontroller's I/O pins allow interfacing with sensors, actuators, and other components.
The analog-to-digital converter (ADC) converts analog signals into digital values, enabling precise measurements. The timers/counters facilitate accurate timing operations, essential for tasks like generating PWM signals or measuring time intervals.
Detailed Application Field Plans
The TS87C58X2-VIA microcontroller finds applications in various fields, including:
- Industrial automation: Control systems, motor control, process monitoring
- Consumer electronics: Home appliances, remote controls, gaming devices
Énumérez 10 questions et réponses courantes liées à l'application de TS87C58X2-VIA dans les solutions techniques
Sure! Here are 10 common questions and answers related to the application of TS87C58X2-VIA in technical solutions:
Q: What is the TS87C58X2-VIA microcontroller used for? A: The TS87C58X2-VIA microcontroller is commonly used in various technical solutions, such as industrial automation, embedded systems, and control applications.
Q: What is the maximum clock frequency supported by the TS87C58X2-VIA? A: The TS87C58X2-VIA microcontroller supports a maximum clock frequency of 33 MHz.
Q: How much program memory does the TS87C58X2-VIA have? A: The TS87C58X2-VIA microcontroller has 8 KB of on-chip program memory.
Q: Can I expand the program memory of the TS87C58X2-VIA? A: No, the program memory of the TS87C58X2-VIA cannot be expanded externally.
Q: What is the data memory capacity of the TS87C58X2-VIA? A: The TS87C58X2-VIA microcontroller has 256 bytes of on-chip RAM.
Q: Does the TS87C58X2-VIA support analog-to-digital conversion (ADC)? A: Yes, the TS87C58X2-VIA microcontroller has an 8-channel 10-bit ADC module.
Q: Can I interface external devices with the TS87C58X2-VIA? A: Yes, the TS87C58X2-VIA provides multiple general-purpose I/O pins that can be used to interface with external devices.
Q: What communication interfaces are supported by the TS87C58X2-VIA? A: The TS87C58X2-VIA microcontroller supports UART (Universal Asynchronous Receiver/Transmitter) and SPI (Serial Peripheral Interface) communication interfaces.
Q: Is the TS87C58X2-VIA suitable for low-power applications? A: Yes, the TS87C58X2-VIA microcontroller has power-saving features like idle mode and power-down mode, making it suitable for low-power applications.
Q: Can I program the TS87C58X2-VIA using a high-level language like C? A: Yes, the TS87C58X2-VIA microcontroller can be programmed using high-level languages like C, with the help of appropriate development tools and compilers.
Please note that these answers are based on general information about the TS87C58X2-VIA microcontroller and may vary depending on specific datasheet or technical documentation.