Microchip Technology
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ATTINY44V-10PU
Voir les détails DataSheets

ATTINY44V-10PU

Product Overview

Category

The ATTINY44V-10PU belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and applications that require embedded control systems.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The ATTINY44V-10PU is available in a 14-pin plastic dual inline package (PDIP).

Essence

The essence of the ATTINY44V-10PU lies in its ability to provide efficient and reliable control capabilities in a compact and low-power package.

Packaging/Quantity

The ATTINY44V-10PU is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Microcontroller architecture: AVR
  • Flash memory: 4KB
  • RAM: 256 bytes
  • Operating voltage: 1.8V - 5.5V
  • Clock speed: 10MHz
  • Digital I/O pins: 12
  • Analog input channels: 8
  • Communication interfaces: SPI, I2C, UART
  • Timers/counters: 2
  • PWM channels: 6
  • ADC resolution: 10-bit
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The ATTINY44V-10PU has a total of 14 pins, each serving a specific purpose. The pin configuration is as follows:

  1. PB0 - Digital I/O / Analog Input
  2. PB1 - Digital I/O / Analog Input
  3. PB2 - Digital I/O / Analog Input
  4. PB3 - Digital I/O / Analog Input
  5. GND - Ground
  6. VCC - Power Supply
  7. PB4 - Digital I/O / Analog Input
  8. PB5 - Digital I/O / Analog Input
  9. RESET - Reset Pin
  10. PB6 - Digital I/O / Analog Input
  11. PB7 - Digital I/O / Analog Input
  12. XTAL1 - Crystal Oscillator Input
  13. XTAL2 - Crystal Oscillator Output
  14. GND - Ground

Functional Features

The ATTINY44V-10PU offers several functional features that make it a versatile microcontroller for various applications:

  • Low power consumption: The microcontroller is designed to operate efficiently, making it suitable for battery-powered devices.
  • Integrated peripherals: It includes built-in peripherals such as timers, PWM channels, and communication interfaces, providing enhanced functionality without the need for external components.
  • High-performance processing: With a clock speed of 10MHz and sufficient memory, it can handle complex tasks effectively.
  • Wide operating voltage range: The microcontroller can operate within a wide voltage range, allowing flexibility in different power supply configurations.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it ideal for portable and battery-powered devices.
  • Integrated peripherals reduce the need for additional components, simplifying circuit design.
  • Wide operating voltage range allows compatibility with various power sources.
  • High-performance processing capabilities enable efficient execution of complex tasks.

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications that can be implemented.
  • The number of I/O pins may be insufficient for certain projects requiring extensive interfacing.

Working Principles

The ATTINY44V-10PU operates based on the AVR architecture, utilizing a combination of hardware and software to execute instructions. It follows a von Neumann architecture, where program instructions and data are stored in the same memory space. The microcontroller fetches instructions from memory, decodes them, and executes the corresponding operations.

Detailed Application Field Plans

The ATTINY44V-10PU finds applications in various fields, including but not limited to:

  1. Home automation systems
  2. Internet of Things (IoT) devices
  3. Robotics
  4. Sensor networks
  5. Industrial control systems
  6. Consumer electronics
  7. Automotive electronics
  8. Medical devices

Detailed and Complete Alternative Models

  • ATTINY24V-10PU: Similar to ATTINY44V-10PU but with reduced flash memory (2KB) and fewer I/O pins (14).
  • ATTINY84V-10PU: Similar to ATTINY44V-10PU but with increased flash memory (8KB) and more I/O pins (14).

These alternative models provide options with varying memory capacities and pin configurations, allowing developers to choose the most suitable microcontroller for their specific requirements.

In conclusion, the ATTINY44V-10PU is a versatile microcontroller that offers low power consumption, high performance, and integrated peripherals. Its compact size and wide operating voltage range make it suitable for a wide range of

Énumérez 10 questions et réponses courantes liées à l'application de ATTINY44V-10PU dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ATTINY44V-10PU in technical solutions:

  1. Q: What is the ATTINY44V-10PU microcontroller used for? A: The ATTINY44V-10PU is a low-power, high-performance microcontroller commonly used in various embedded systems and IoT applications.

  2. Q: What is the operating voltage range of ATTINY44V-10PU? A: The operating voltage range of ATTINY44V-10PU is typically between 1.8V and 5.5V.

  3. Q: How many I/O pins does ATTINY44V-10PU have? A: ATTINY44V-10PU has a total of 14 I/O pins, which can be configured as digital inputs or outputs.

  4. Q: Can ATTINY44V-10PU be programmed using Arduino IDE? A: Yes, ATTINY44V-10PU can be programmed using the Arduino IDE by selecting the appropriate board and programmer settings.

  5. Q: What is the maximum clock frequency supported by ATTINY44V-10PU? A: ATTINY44V-10PU supports a maximum clock frequency of 20 MHz when powered at 5V.

  6. Q: Does ATTINY44V-10PU have built-in analog-to-digital converters (ADC)? A: Yes, ATTINY44V-10PU has an 8-channel, 10-bit ADC for analog signal conversion.

  7. Q: Can ATTINY44V-10PU communicate with other devices using serial communication protocols? A: Yes, ATTINY44V-10PU supports serial communication protocols like UART, SPI, and I2C.

  8. Q: What is the flash memory size of ATTINY44V-10PU? A: ATTINY44V-10PU has 4KB of flash memory, which can be used to store program code.

  9. Q: Is ATTINY44V-10PU suitable for battery-powered applications? A: Yes, ATTINY44V-10PU is designed for low-power applications and can operate efficiently on battery power.

  10. Q: Can ATTINY44V-10PU be used in industrial automation systems? A: Yes, ATTINY44V-10PU is commonly used in industrial automation systems due to its small size, low power consumption, and versatile I/O capabilities.

Please note that the answers provided here are general and may vary depending on specific application requirements and configurations.