Voir les spécifications pour les détails du produit.
S25FL128SAGNFV000
Basic Information Overview
- Category: Flash Memory
- Use: Data storage and retrieval in electronic devices
- Characteristics:
- Non-volatile memory
- High-speed read and write operations
- Low power consumption
- Wide temperature range (-40°C to +85°C)
- Package: SOP (Small Outline Package)
- Essence: Provides reliable and efficient data storage solution for various electronic devices
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements
Specifications
- Memory Capacity: 128 Megabits (16 Megabytes)
- Interface: Serial Peripheral Interface (SPI)
- Voltage Range: 2.7V to 3.6V
- Operating Frequency: Up to 104 MHz
- Erase/Program Operations:
- Sector Erase: 4 Kbytes
- Block Erase: 64 Kbytes
- Page Program: 256 bytes
- Data Retention: Up to 20 years
- Endurance: Up to 100,000 erase/program cycles
Detailed Pin Configuration
The S25FL128SAGNFV000 has a total of 8 pins: 1. Chip Select (/CS) 2. Serial Clock (SCLK) 3. Serial Data Input (SI) 4. Serial Data Output (SO) 5. Write Protect (/WP) 6. Hold (/HOLD) 7. Ground (GND) 8. Power Supply (VCC)
Functional Features
- High-performance SPI interface for fast data transfer
- Efficient sector and block erase operations
- Reliable page program functionality
- Hardware and software write protection options
- Deep power-down mode for low-power applications
- Advanced security features for data protection
Advantages
- Fast read and write operations enhance overall system performance
- Low power consumption extends battery life in portable devices
- Wide temperature range allows usage in various environments
- High endurance ensures long-term reliability
- Compact SOP package facilitates easy integration into electronic designs
Disadvantages
- Limited storage capacity compared to higher-capacity flash memory options
- SPI interface may not be suitable for applications requiring faster data transfer rates
Working Principles
The S25FL128SAGNFV000 utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is removed. The memory can be erased and programmed at the sector, block, or page level, allowing for efficient data management.
Detailed Application Field Plans
The S25FL128SAGNFV000 is widely used in various electronic devices, including: - Consumer electronics (smartphones, tablets, digital cameras) - Automotive systems (infotainment, navigation, instrument clusters) - Industrial equipment (data loggers, control systems, robotics) - Networking devices (routers, switches, modems) - Medical devices (patient monitors, diagnostic equipment)
Detailed and Complete Alternative Models
- S25FL064L: 64 Megabit Flash Memory with similar specifications and features.
- S25FL256S: 256 Megabit Flash Memory with higher storage capacity.
- S25FS512S: 512 Megabit Flash Memory with advanced security features.
Note: This is not an exhaustive list, and there are several other alternative models available in the market.
Word count: 410 words
Énumérez 10 questions et réponses courantes liées à l'application de S25FL128SAGNFV000 dans les solutions techniques
Sure! Here are 10 common questions and answers related to the application of S25FL128SAGNFV000 in technical solutions:
Q: What is the S25FL128SAGNFV000? A: The S25FL128SAGNFV000 is a serial NOR flash memory chip manufactured by Cypress Semiconductor. It offers 128 megabits (16 megabytes) of non-volatile storage.
Q: What are the typical applications of S25FL128SAGNFV000? A: The S25FL128SAGNFV000 is commonly used in various embedded systems, such as automotive electronics, industrial control systems, consumer electronics, and networking equipment.
Q: What is the interface used to communicate with the S25FL128SAGNFV000? A: The S25FL128SAGNFV000 uses a standard Serial Peripheral Interface (SPI) for communication, which is widely supported by microcontrollers and other devices.
Q: What is the maximum data transfer rate supported by S25FL128SAGNFV000? A: The S25FL128SAGNFV000 supports a maximum SPI clock frequency of 104 MHz, allowing for fast data transfers.
Q: Can the S25FL128SAGNFV000 be easily integrated into existing designs? A: Yes, the S25FL128SAGNFV000 is designed to be pin-compatible with other popular NOR flash memory chips, making it relatively easy to replace or upgrade existing designs.
Q: Does the S25FL128SAGNFV000 support hardware and software protection features? A: Yes, the S25FL128SAGNFV000 provides hardware-based write protection and software-controlled protection mechanisms to prevent accidental or unauthorized modifications to the stored data.
Q: What is the typical power consumption of the S25FL128SAGNFV000? A: The S25FL128SAGNFV000 has low power consumption, with an active current of around 10 mA during read operations and standby current of less than 1 µA.
Q: Can the S25FL128SAGNFV000 operate in extreme temperature conditions? A: Yes, the S25FL128SAGNFV000 is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.
Q: Does the S25FL128SAGNFV000 support over-the-air (OTA) firmware updates? A: Yes, the S25FL128SAGNFV000 can be used to store firmware or software updates, allowing for OTA updates in systems that support it.
Q: Are there any development tools or software libraries available for working with the S25FL128SAGNFV000? A: Yes, Cypress Semiconductor provides various development tools, software libraries, and documentation to assist developers in integrating and programming the S25FL128SAGNFV000 in their applications.
Please note that the answers provided here are general and may vary depending on specific implementation details and requirements.